The GEMU F60 motorized 2/2-way filling valve is designed for extremely precise and fast filling processes in aseptic and hygienic areas of application. The GEMU F60 filling valve enables activation in real time, ultra-quick load cycles and high flow rates of up to 6,600 litres per hour. The sealing concept of the valve is based on the GEMU PD design, whereby the actuator is hermetically separated from the medium. All actuator parts (except seals) are made from stainless steel. The filling valve is available in the electrical version F60 (and the pneumatic version F40).
  • Suitable for inert, corrosive, liquid and gaseous media
  • CIP/SIP capable and autoclave-capable
  • Hermetic separation between medium and actuator due to PD sealing technology
  • Flexible and fast program changes thanks to freely programmable filling curves
  • Suitable for use in insulators, as the motorized actuator does not generate exhaust air; shielded in line with IP69K
  • High switching cycles (over 10 million)
  • Fast filling cycles (less than 400 ms) possible
  • Suitable for contact with food according to Regulation (EC) No. 1935/2004
  • Especially suitable for media containing fat or oil
  • Extensive range of accessories including controller, software and cables
  • No need to retighten the seal thanks to self-adjusting sealing washer
Unit of Measure




Body Material

N/A 1.4435, Investment Casting

Body Configuration

N/A 2/2-Way

Actuator Type

N/A Motorized

Operating Pressure

N/A 0 to 7 bar

DN Size

N/A 15

Media Temperature

N/A -10 to 140 ºC

Flow Rate

N/A Up to 6,600 L/h